Figure 44 Host Interface Ports (Eternus Dx60 S5); Table 24 Status And Meaning Of Each Led (Host Interface For The Eternus Dx60 S5) - Fujitsu ETERNUS DX S5 Series Operation Manual (Basic

A. Component Names
Controller Enclosure
■
Host Interface
A host interface is a board that has interface ports to connect a controller to the server.
●
ETERNUS DX60 S5
There are five types of host interfaces: FC 16Gbit/s, FC 8Gbit/s, iSCSI 10Gbit/s, iSCSI 1Gbit/s, and SAS 12Gbit/s.
Figure 44
FC
iSCSI 10Gbit/s
iSCSI 1Gbit/s
Port#0 Port#1
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 24 Status and Meaning of Each LED (Host Interface for the ETERNUS DX60 S5)
LED name
LINK/FAULT
FAULT
LINK
Host Interface Ports (ETERNUS DX60 S5)
LINK/FAULT LED
SAS 12Gbit/s
FAULT LED
LINK LED
LED status
(green)
(amber)
(green)
(amber)
Port#0 Port#1
LINK/FAULT LED
Meaning
The link between the host interface port (FC or SAS) and the
destination port has been established.
The host interface port (FC or SAS) is in error status.
The link between the host interface port (iSCSI) and the destination
port has been established.
The host interface port (iSCSI) is in error status.
116 Operation Guide (Basic)