Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 55

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
(8)
Attach the "DE_No." labels to the positions shown below.
Attach the labels in the same installation order as the drive enclosures (cable between enclosures
connection order).
Right end of the high-density drive enclosure
as seen from the front
(9)
Attach the front cover.
Front cover
5
Check the connection destination of the mini SAS HD cables between enclosures.
The connectors on the cable with the "l" symbol are connected to the DI (IN) ports on the added drive
•
enclosure.
Note
The DE_No. labels are supplied with the ETERNUS DX.
Top right of the high-density drive enclosure
as seen from the rear
DE_No. label
55 Operation Guide (Basic)