Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 37

4. Component Expansion/Function Enhancement
Installing Additional Drives
(2)
Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock lever
is still left open.
(3)
Swing the lock lever in the direction of the arrow, until the lock clicks shut.
(4)
Check that the newly installed drive's DRIVE READY LED lights up green.
5
To install more additional drives, repeat
6
If a wrist strap is used, remove the wrist strap.
7
In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives have
been recognized.
8
Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
■
For Drives for High-Density Drive Enclosures
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
• Hold the drive with both hands to protect against jarring.
Step 3 and Step 4.
37
Lock lever
Operation Guide (Basic)