Changing The Dashboard Bulbs - APRILIA SR 50 - 2001 Manual

CHANGING
THE DASHBOARD BULBS
Carefully read p. 82 (BULBS).
NOTE
Before changing a bulb, check
the fuses, see p. 79 (CHANGING FUSES).
The dashboard contains:
– the warning light bulbs;
– the dashboard lighting bulbs.
To change the bulbs:
♦
Partially remove the upper handlebar
cover, see p. 70 (PARTIAL REMOVAL OF
THE UPPER HANDLEBAR COVER).
84
use and maintenance SR 50
6
5
1 2 3
WARNING LIGHT BULBS
NOTE
Extract the bulb sockets one by
one, in such a way as to avoid positioning
them incorrectly during the reassembly.
♦
Extract the relative bulb socket:
Pos. Warning light
Direction indicators
1
( )
2 stroke oil reserve
2
( )
3 High beam ( )
Low fuel ( )
4
Injection check
5
♦ Extract the bulb and replace it with one of
the same type.
7
4 8
DASHBOARD LIGHTING BULBS
NOTE
Extract the bulb sockets one by
one, in such a way as to avoid positioning
them incorrectly during the reassembly.
♦ Extract the bulb socket of the dashboard
part in which there has been a light
Colour
decrease:
green
Pos.
red
6
blue
7
amber
8
red
♦
Extract the bulb and replace it with one of
the same type.
Lit part
Upper right part
Upper left part
Lower right part