Unpacking The Ptx5000 Packet Transport Switch - Juniper PTX Series Hardware Manual

PTX5000 Packet Transport Switch Hardware Guide
Related
Documentation

Unpacking the PTX5000 Packet Transport Switch

62
Overview of Unpacking the PTX5000 Packet Transport Switch on page 61
Unpacking the PTX5000 Packet Transport Switch on page 62
The packet transport switch is shipped in a wooden crate. A wooden pallet forms the
base of the crate. The packet transport switch chassis is bolted to this pallet. Quick Start
installation instructions and a cardboard accessory box are also included in the shipping
crate.
NOTE: The packet transport switch is maximally protected inside the shipping
crate. Do not unpack it until you are ready to begin installation.
To unpack the packet transport switch (see
Move the shipping crate to a staging area as close to the installation site as possible,
1.
where you have enough room to remove the components from the chassis. While the
chassis is bolted to the pallet, you can use a forklift or pallet jack to move it.
Position the shipping crate with the arrows pointing up.
2.
Open all the latches on the shipping crate.
3.
Remove the front door of the shipping crate cover and set it aside.
4.
Slide the remainder of the shipping crate cover off the pallet.
5.
Remove the foam covering the top of the packet transport switch.
6.
Remove the accessory box and the Quick Start documentation.
7.
Verify the parts received against the lists in
8.
Switch Parts Received" on page
Remove the vapor corrosion inhibitor (VCI) packs attached to the pallet, being careful
9.
not to break the VCI packs open.
To remove the brackets holding the chassis on the pallet, use a 1/2-in. socket wrench
10.
and a number 2 Phillips screwdriver to remove the bolts and screws from the brackets.
Store the brackets and bolts inside the accessory box.
11.
Save the shipping crate cover, pallet, and packing materials in case you need to move
12.
or ship the packet transport switch at a later time.
Figure 31 on page
"Verifying the PTX5000 Packet Transport
63.
Copyright © 2012, Juniper Networks, Inc.
63):