Ptx5000 Craft Interface Description; Craft Interface Front Panel; Figure 14: Craft Interface - Juniper PTX Series Hardware Manual

PTX5000 Packet Transport Switch Hardware Guide

PTX5000 Craft Interface Description

26
The craft interface allows you to view status and troubleshooting information at a glance
and to perform many system control functions. It is hot-insertable and hot-removable.
The craft interface is located at the upper front of the PTX5000 Packet Transport Switch.
Craft Interface Front Panel on page 26
Craft Interface LCD on page 27
LCD Navigation Buttons on page 28

Craft Interface Front Panel

Figure 14 on page 26 shows the craft interface.

Figure 14: Craft Interface

1 2
7
1— Alarm relay contacts
2— SIB LEDs
3— Host Subsystem LEDs
4— CCG LEDs
5— Fan tray LEDs
The front panel of the craft interface contains:
A four-line LCD display, along with six navigation buttons. The LCD display operates
in Idle mode or alarm mode.
Alarm relay contacts.
Two configuration switches:
The M/S configuration switch must be set to S.
The CHASSIS ID configuration switch must always be set to 0.
NOTE: The CHASSIS ID configuration switch is set to 0 by default.
LEDs
3 4 5 6
1
2
8 9
6— Alarm LEDs and ACO/LT button
7— M/S CHASSIS NUM
switches
8— Power system LEDs
9— LCD
10— LCD navigation buttons
10
configuration
Copyright © 2012, Juniper Networks, Inc.