CHAPTER 6
Unpacking the PTX5000 Packet
Transport Switch
Overview of Unpacking the PTX5000 Packet Transport Switch
Related
Documentation
Tools and Parts Required to Unpack the PTX5000 Packet Transport Switch
Copyright © 2012, Juniper Networks, Inc.
Overview of Unpacking the PTX5000 Packet Transport Switch on page 61
Tools and Parts Required to Unpack the PTX5000 Packet Transport Switch on page 61
Unpacking the PTX5000 Packet Transport Switch on page 62
Verifying the PTX5000 Packet Transport Switch Parts Received on page 63
To unpack the packet transport switch:
Gather the tools required to unpack the packet transport switch.
1.
See
"Tools and Parts Required to Unpack the PTX5000 Packet Transport Switch"
on page
61.
Remove the packet transport switch, accessory box, tool kit, and all parts from the
2.
shipping crate.
See
"Unpacking the PTX5000 Packet Transport Switch" on page
Verify that all parts have been received.
3.
See
"Verifying the PTX5000 Packet Transport Switch Parts Received" on page
Overview of Installing the PTX5000 Packet Transport Switch on page 53
To unpack the packet transport switch and prepare for installation, you need the following
tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
62.
63.
61