Figure 37: Installing The Ptx5000 Packet Transport Switch In A Four-Post; Table 30: Mounting Hole Locations For Installing A Chassis In An Open-Frame - Juniper PTX Series Hardware Manual

PTX5000 Packet Transport Switch Hardware Guide
80

Figure 37: Installing the PTX5000 Packet Transport Switch in a Four-Post

Rack
1— Four-post rack
The holes in the center-mounting brackets are spaced at 3 U (5.25 in. or 13.3 cm).
Table 30: Mounting Hole Locations for Installing a Chassis in an
Open-Frame Rack
Hole Distance Above U Division
104 60.38 in. (153.4 cm)
95 55.13 in. (140.0 cm)
86 49.88 in. (126.7 cm)
77 44.63 in. (113.3 cm)
1 1
2— Front-mounting flange
Copyright © 2012, Juniper Networks, Inc.
2
34.50 U
31.50 U
28.50 U
25.50 U