Fan Trays Leds; Table 11: Ptx5000 Ccg Leds; Table 12: Power Supply Module Leds On The Craft Interface; Table 13: Fan Tray Leds On The Craft Interface - Juniper PTX Series Hardware Manual

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
show the status of the CCG in slot
CCG0
of the CCG LEDs.

Table 11: PTX5000 CCG LEDs

Label Color
MASTER Green
–
Green
OK
–
FAIL Red
–
A status LED—labeled
PSM
the craft interface below the

Table 12: Power Supply Module LEDs on the Craft Interface

Color State
Green On steadily
Red On steadily
– Off

Fan Trays LEDs

One status LED—labeled 0
subsystem LEDs on the craft interface.

Table 13: Fan Tray LEDs on the Craft Interface

Color State
Green On steadily
Red On steadily
– Off
PTX5000 Craft Interface Description on page 26
Chapter 3: PTX5000 Hardware Components Overview
. Table 11 on page 31
CCG0
State Description
On steadily CCG is functioning as the master.
Off CCG is offline or functioning as the backup.
On steadily CCG is online and is functioning normally.
Off CCG is offline or absent.
On steadily CCG has failed.
Off No failure has been detected.
through —for each power supply module is located on
0 3
PDU LEDs.
Description
The PSM is functioning normally.
The PSM has failed.
The PSM is offline or absent.
through 2 — for each fan tray is located to the right of the host
Description
The fan tray is functioning normally.
The fan tray has failed.
The fan tray is offline or absent.
describes the functions
31