Table 31: Mounting Hole Locations For Installing A Ptx5000 Packet Transport - Juniper PTX Series Hardware Manual

Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Chapter 8: Installing the PTX5000 Packet Transport Switch Using a Mechanical Lift
Table 30: Mounting Hole Locations for Installing a Chassis in an
Open-Frame Rack (continued)
Hole Distance Above U Division
68 39.38 in. (100.0 cm)
59 34.13 in. (86.7 cm)
50 28.88 in. (73.3 cm)
41 23.63 in. (60.0 cm)
32 18.38 in. (46.7 cm)
23 13.13 in. (33.3 cm)
Table 31: Mounting Hole Locations for Installing a PTX5000 Packet
Transport Switch Chassis in a Four-Post Rack
Hole Distance Above U Division
110 63.88 in. (162.2 cm)
101 58.63 in. (148.9 cm)
92 53.38 in. (135.6 cm)
83 48.13 in. (122.2 cm)
74 42.88 in. (108.9 cm)
65 37.63 in. (95.6 cm)
56 32.38 in. (82.2 cm)
47 27.13 in. (68.9 cm)
38 21.88 in. (55.6 cm)
29 16.63 in. (42.2 cm)
20 11.38 in. (28.9 cm)
11 6.13 in. (15.6 cm)
The holes in the front-mounting flanges are spaced at 3 U (5.25 in. or 13.3 cm).
Overview of Installing a PTX5000 Packet Transport Switch Using a Mechanical Lift
on page 75
22.50 U
19.50 U
16.50 U
13.50 U
10.50 U
7.50 U
36.50 U
33.50 U
30.50 U
27.50 U
24.50 U
21.50 U
18.50 U
15.50 U
12.50 U
9.50 U
6.50 U
3.50 U
81