CHAPTER 10
Connecting the PTX5000 Packet
Transport Switch to External Devices
Tools and Parts Required to Connect the PTX5000 Packet Transport Switch to External
Devices
Related
Documentation
Copyright © 2012, Juniper Networks, Inc.
Tools and Parts Required to Connect the PTX5000 Packet Transport Switch to External
Devices on page 85
Connecting the PTX5000 Packet Transport Switch to a Management Ethernet
Device on page 90
To connect the packet transport switch to external devices, you need the following tools
and parts:
2.5-mm flat-blade (-) screwdriver for the alarm relay contacts
Electrostatic discharge (ESD) grounding wrist strap (provided in the accessory kit)
Verifying the PTX5000 Packet Transport Switch Parts Received on page 63
Connecting the PTX5000 Packet Transport Switch to an External Alarm-Reporting
Device on page 87
85