Rack Requirements For The Ptx5000 Packet Transport Switch; Rack Size And Strength - Juniper PTX Series Hardware Manual

PTX5000 Packet Transport Switch Hardware Guide
Related
Documentation

Rack Requirements for the PTX5000 Packet Transport Switch

Rack Size and Strength

56
PTX5000 Physical Specifications on page 255
Verify that the plan for power installation meets all electrical safety guidelines.
6.
See "PTX5000 General Electrical Safety Guidelines" on page
Verify that your rack meets the minimum requirements for the installation of the
7.
packet transport switch.
Rack Requirements for the PTX5000 Packet Transport Switch on page 56
PTX5000 Chassis Description on page 12
Plan to secure the rack to the floor and building structure.
8.
See "Rack Requirements for the PTX5000 Packet Transport Switch" on page
Acquire cables and connectors:
9.
Determine the number of cables and type of cable needed based on your planned
configuration.
"Network Cable and Transceiver Overview for PTX Series Packet Transport
Switches" on page 267
Supported Network Interface Standards by Transceiver
Review the maximum distance allowed for each cable. Choose the length of cable
based on the distance between the hardware components being connected.
Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 269
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on
page 268
Plan the cable routing and management.
10.
PTX5000 Cable Management System on page 15
Maintaining the PTX5000 PIC Cables on page 112
PTX5000 Packet Transport Switch Description on page 3
Overview of Installing the PTX5000 Packet Transport Switch on page 53
Rack Size and Strength on page 56
Spacing of Mounting Bracket and Flange Holes on page 58
Connection to Building Structure on page 58
The PTX5000 Packet Transport Switch is designed for installation in a rack that complies
with either of the following standards:
and PTX5000 Packet Transport Switch PIC Guide
Copyright © 2012, Juniper Networks, Inc.
239.
56.