Device (Dv) Object - Mitsubishi Electric MELSEC iQ-F Series User Manual

Device (DV) object

This object indicates the Ethernet module.
Property list
The following table lists available properties for the Device object.
Additionally, the availability of reading/writing data from/to a BACnet device is shown in the following table.
R: Read-only, W: Read/Write
PropertyID Property
11 ApduTimeout
12 ApplicationSoftwareVersion
30 DeviceAddressBinding
44 FirmwareRevision
56 LocalDate
57 LocalTime
62 MaxApduLengthAccepted
70 ModelName
73 NumberOfAPDURetries
75 ObjectIdentifier
76 ObjectList
77 ObjectName
79 ObjectType
96 ProtocolObjectTypesSupported
97 ProtocolServicesSupported
98 ProtocolVersion
107 SegmentationSupported
112 SystemStatus
120 VendorIdentifier
121 VendorName
139 ProtocolRevision
4 FUNCTIONS
44
4.2 BACnet Object Function
Data type
Unsigned
CharacterString
ListofBACnetAddressBinding
CharacterString
Date
Time
Unsigned
CharacterString
Unsigned
BACnetObjectIdentifier
BACnetARRAY[N]ofBACnetObjectIdentifi
er
CharacterString
Enumerated
BitString
BitString
Unsigned
Enumerated
Enumerated
Unsigned16
CharacterString
Unsigned
R/W Description
R Indicates the resending time interval.
The Ethernet module is 0 (Retry, Timeout)
R Indicates the application software version.
The Ethernet module is 0.
R Indicates the list of device IDs and
addresses of other devices.
R Indicates a character string indicating the
version.
In the case of Ver.1.100, it will be 1100.
R Indicates the date of the device.
R Indicates the time of the device.
R Indicates the maximum length of the
APDU to be accepted.
The Ethernet module is 1024.
R Indicates the character string for a 12-
character and left-justified model name.
The Ethernet module is FX5-ENET.
R Indicates the maximum number of
resends.
The Ethernet module is 0 (Retry, Timeout)
R Indicates the ID to identify the object.
R Indicates the list of objects in the device.
R Indicates the object name.
R Indicates the object type.
R Indicates the objects supported.
R Indicates the services supported.
R Indicates the version of the BACnet
protocol supported.
The Ethernet module is 1.
R Indicates whether or not message
segmentation is supported.
The Ethernet module does not support it.
R Indicates the device status.
R Indicates the vendor identifier code
assigned by ASHRAE.
The Ethernet module is 434.
R Indicates the manufacturer of the device.
The Ethernet module is Mitsubishi Electric
Corporation Nagoya Works.
R Indicates the revision level to be
supported.
The level varies depending on the
standard set with the engineering tool.
The standards for the Ethernet module are
as follows.
• ANSI/ASHRAE Standard 135-2016: 20
• ANSI/ASHRAE Standard 135-2012: 14
• ANSI/ASHRAE Standard 135-2010: 12
• ANSI/ASHRAE Standard 135-2004: 4
• IEIEJ-G-0006:2006 Addendum-a