Mitsubishi Electric MELSEC iQ-F Series User Manual page 90

BACnet communication AnalogValue
■BACnet communication AnalogValue (Un\G8920 to Un\G9071)
This buffer memory area is used for the AnalogValue object.
Address
Un\G8920 to Un\G8931
Un\G8940 to Un\G8951
Un\G8960 to Un\G8971
Un\G8980 to Un\G8991
Un\G9000 to Un\G9011
Un\G9020 to Un\G9031
Un\G9040 to Un\G9051
Un\G9060 to Un\G9071
When the value of `Module READY` (Un\G34, b0) was changed from 0 to 1, the AnalogValue object settings
are reflected. ( Page 57 AnalogValue object setting)
The following table lists the buffer memory area format (BACnet communication AnalogValue 1) of the AnalogValue object.
Address Name
Un\G8920, Object ID
Un\G8921
Un\G8922, PresentValue
Un\G8923
Un\G8924 OutOfService
Un\G8925 Reliability
Un\G8926, Value setting value
Un\G8927
Un\G8928 Write setting
Un\G8929 Write control
Un\G8930 Update counter
APPX
88
Appendix 1 Buffer Memory
Description
BACnet communication AnalogValue 1
BACnet communication AnalogValue 2
BACnet communication AnalogValue 3
BACnet communication AnalogValue 4
BACnet communication AnalogValue 5
BACnet communication AnalogValue 6
BACnet communication AnalogValue 7
BACnet communication AnalogValue 8
Description
b0 to b9: Object type Stores the object type. (Fixed at 2)
b10 to b31: Instance Stores the instance number. (0 to 4194303)
number
Stores the current analog value. (Within the 32-bit floating-point data type real
number)
b0: OutOfService Sets the value of the OutOfService property.
• ON: TRUE
• OFF: FALSE
b0 to b5: Reliability Stores the value of the Reliability property.
• 0: NoFaultDetected
• 1: NoSensor
• 2: OverRange
• 3: UnderRange
• 4: OpenLoop
• 5: ShortedLoop
• 6: NoOutput
• 7: UnreliableOther
• 8: ProcessError
• 9: MultiStateFault
• 10: ConfigurationError
Sets the analog value to be written to PriorityArray. (Within the 32-bit floating-
point data type real number)
b0: Null setting flag Sets whether or not to write Null to PriorityArray.
• ON: Write
• OFF: Do not write
b1 to 5: Priority Sets the priority for writing to PriorityArray. (1 to 16)
b0: Write flag Sets whether or not to write the Value setting value to PriorityArray.
The write flag is enabled when OutOfService is set to OFF (FALSE).
• ON: Write
• OFF: Do not write
Stores the number of times PresentValue was updated. (0 to 32767)
*1
*2