Multi-State Output (Mo) Object - Mitsubishi Electric MELSEC iQ-F Series User Manual

Multi-State Output (MO) object

This object handles multiple-state output.
Property list
The following table lists available properties for the Multi-State Output object.
Additionally, the availability of reading/writing data from/to a BACnet device is shown in the following table.
R: Read-only, W: Read/Write
PropertyID Property
36 EventState
40 FeedbackValue
74 NumberOfStates
75 ObjectIdentifier
77 ObjectName
79 ObjectType
81 OutOfService
85 PresentValue
87 PriorityArray
103 Reliability
104 RelinquishDefault
110 StateText
111 StatusFlags
371 PropertyList
431 CurrentCommandPriority
*1 Only ANSI/ASHRAE Standard 135-2016 and ANSI/ASHRAE Standard 135-2012 are supported.
*2 Only ANSI/ASHRAE Standard 135-2016 is supported.
Buffer memory format of the Multi-State Output object
For the format of the properties assigned to the buffer memory, refer to the following.
Page 96 BACnet communication Multi-state Output
Ethernet module operation
■Operation at startup
For the startup operation, refer to the following.
Page 22 Ethernet module operation
Setting using a program
For the setting using the program, refer to the following.
Page 26 Setting using a program
4 FUNCTIONS
42
4.2 BACnet Object Function
*1
*2
Data type
Enumerated
Unsigned
Unsigned
BACnetObjectIdentifier
CharacterString
Enumerated
BOOLEAN
REAL
BACnetPriorityArray
Enumerated
REAL
BACnetARRAY[N]ofCharacterString
BitString
BACnetARRAY[N]ofBACnetPropertyIdenti
fier
BACnetOptionalUnsigned
R/W Description
R Indicates the event status.
R Indicates the feedback value.
R Indicates the number of states that can be
obtained by PresentValue.
R Indicates the ID to identify the object.
R Indicates the object name.
R Indicates the object type.
W Indicates whether the device is
disconnected from the physical output.
W Indicates the logical state of one of the
multiple states of the output.
R Indicates an array of priority values for
determining the output value.
R Indicates reliability.
W Indicates the default value to be used
when all values of PriorityArray are NULL.
R Indicates the text for the state.
R Indicates the object status.
R Indicates the property list.
R Indicates the PriorityArray array number
used for PresentValue.