Binaryinput (Bi) Object - Mitsubishi Electric MELSEC iQ-F Series User Manual

BinaryInput (BI) object

This object handles binary input.
Property list
The following table lists available properties for the BinaryInput object.
Additionally, the availability of reading/writing data from/to a BACnet device is shown in the following table.
R: Read-only, W: Read/Write
PropertyID Property
4 ActiveText
15 ChangeOfStateCount
16 ChangeOfStateTime
33 ElapsedActiveTime
36 EventState
46 InactiveText
75 ObjectIdentifier
77 ObjectName
79 ObjectType
81 OutOfService
84 Polarity
85 PresentValue
103 Reliability
111 StatusFlags
114 TimeOfActiveTimeReset
115 TimeOfStateCountReset
*1
371 PropertyList
*1 Only ANSI/ASHRAE Standard 135-2016 and ANSI/ASHRAE Standard 135-2012 are supported.
Buffer memory format of the BinaryInput object
For the format of the properties assigned to the buffer memory, refer to the following.
Page 90 BACnet communication BinaryInput
Ethernet module operation
■Operation at startup
For the startup operation, refer to the following.
Page 22 Ethernet module operation
Setting using a program
For the setting using the program, refer to the following.
Page 26 Setting using a program
Data type
CharacterString
Unsigned
BACnetDateTime
Unsigned32
Enumerated
CharacterString
BACnetObjectIdentifier
CharacterString
Enumerated
BOOLEAN
Enumerated
REAL
Enumerated
BitString
BACnetDateTime
BACnetDateTime
BACnetARRAY[N]ofBACnetPropertyIdenti
fier
R/W Description
R Indicates the text when the value of
PresentValue is ACTIVE.
W Indicates the number of status changes
that have occurred.
R Indicates the date and time when a status
change has occurred.
W Indicates the integrated time when the
value of PresentValue is ACTIVE.
R Indicates the event status.
R Indicates the text when the value of
PresentValue is INACTIVE.
R Indicates the ID to identify the object.
R Indicates the object name.
R Indicates the object type.
W Indicates whether the device is
disconnected from the physical input.
W Indicates polarity.
W Indicates the logical state of the binary
input.
R Indicates reliability.
R Indicates the object status.
W Indicates the date and time when
ElapsedActiveTime is set to 0.
W Indicates the date and time when
ChangeOfStateCount is set to 0.
R Indicates the property list.
4 FUNCTIONS
4.2 BACnet Object Function
4
37