Generic Terms And Abbreviations - Mitsubishi Electric MELSEC iQ-F Series User Manual

Term
Join
Leave
Local Broadcast
Object
Object type number
ObjectIdentifier
Priority
Properties
Remote Broadcast
Service

GENERIC TERMS AND ABBREVIATIONS

Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation
Ethernet module
FX5 CPU module
Description
To notify the BACnet workstation and other BACnet controllers of its existence as a BACnet controller and
to enter the BACnet system.
The joining processing methods and procedures vary depending on the BACnet standard.
To leave from the BACnet system
To send data to all devices on the same network as a device that sent the data
Information about the input, output, and internal state of the BACnet device.
It also represents a BACnet object.
A number assigned to ObjectType
An object identifier consisting of the object type and the instance number of the object
Indicates priority.
Detailed information and attributes of each object.
An object consists of properties, and depending on the status of the properties, it may affect other
properties and change control.
To specify a different network from a device that sent the data and send data to all devices or nodes on the
network
A function that BACnet devices provide to each other with external BACnet devices.
It also represents the BACnet service.
Description
A generic term for the following modules when the Ethernet communication function is used:
• FX5-ENET
• FX5-ENET/IP
A generic term for the FX5UJ CPU module, FX5U CPU module, and FX5UC CPU module
11