Mitsubishi Electric MELSEC iQ-F Series User Manual page 57

Object setting
Set values such as an instance number for each object.
Values can be set for the number of instances available for each object. ( Page 15 Object)
■Accumulator object setting
Item
Instance No.
Object Name
Scale
Units (Select)
Units (Input)
Max_Pres_Value
Description
Set an instance number for the Accumulator object. (The same
value cannot be set in the Accumulator object.)
Set an object name for the Accumulator object. (The same value
cannot be set in a module.)
Set a value for scale conversion. (in increments of 0.001)
Set a unit. (The value can be set only when "Other" is selected in
the drop-down menu.)
Input a setting value when Units (Select) is set to "Other".
Set the maximum value for counter reset.
Setting range
0 to 4194303
(Default: Empty)
16 one-byte alphanumeric
characters maximum
(Default: Empty)
0 to 4294967295
(Default: 1000)
• 0: square-meters
• 1: square-feet
• 2: milliamperes
• 3: amperes
• 4: ohms
• 5: volts
• 6: kilovolts
• 7: megavolts
• 8: volt-amperes
• 9: kilovolt-amperes
• Others
(Default: 0: square-meters)
10 to 65535
(Default: Empty)
0 to 4294967295
(Default: 999999)
6 PARAMETER SETTINGS
6.3 Basic Settings
6
55