Mitsubishi Electric MELSEC iQ-F Series User Manual page 88

BACnet communication AnalogOutput
■BACnet communication AnalogOutput (Un\G8760 to Un\G8911)
This buffer memory area is used for the AnalogOutput object.
Address
Un\G8760 to Un\G8771
Un\G8780 to Un\G8791
Un\G8800 to Un\G8811
Un\G8820 to Un\G8831
Un\G8840 to Un\G8851
Un\G8860 to Un\G8871
Un\G8880 to Un\G8891
Un\G8900 to Un\G8911
When the value of `Module READY` (Un\G34, b0) was changed from 0 to 1, the AnalogOutput object settings
are reflected. ( Page 56 AnalogOutput object setting)
The following table lists the buffer memory area format (BACnet communication AnalogOutput 1) of the AnalogOutput object.
Address Name
Un\G8760, Object ID
Un\G8761
Un\G8762, PresentValue
Un\G8763
Un\G8764 OutOfService
Un\G8765 Reliability
Un\G8766, Value setting value
Un\G8767
Un\G8768 Write setting
Un\G8769 Write control
Un\G8771 Update counter
APPX
86
Appendix 1 Buffer Memory
Description
BACnet communication AnalogOutput 1
BACnet communication AnalogOutput 2
BACnet communication AnalogOutput 3
BACnet communication AnalogOutput 4
BACnet communication AnalogOutput 5
BACnet communication AnalogOutput 6
BACnet communication AnalogOutput 7
BACnet communication AnalogOutput 8
Description
b0 to b9: Object type Stores the object type. (Fixed at 1)
b10 to b31: Instance Stores the instance number. (0 to 4194303)
number
Stores the current analog value. (Within the 32-bit floating-point data type real
number)
b0: OutOfService Sets the value of the OutOfService property.
• ON: TRUE
• OFF: FALSE
b0 to b5: Reliability Stores the value of the Reliability property.
• 0: NoFaultDetected
• 1: NoSensor
• 2: OverRange
• 3: UnderRange
• 4: OpenLoop
• 5: ShortedLoop
• 6: NoOutput
• 7: UnreliableOther
• 8: ProcessError
• 9: MultiStateFault
• 10: ConfigurationError
Sets the analog value to be written to PriorityArray. (Within the 32-bit floating-
point data type real number)
b0: Null setting flag Sets whether or not to write Null to PriorityArray.
• ON: Write
• OFF: Do not write
b1 to 5: Priority Sets the priority for writing to PriorityArray. (1 to 16)
b0: Write flag Sets whether or not to write the Value setting value to PriorityArray.
The write flag is enabled when OutOfService is set to OFF (FALSE).
• ON: Write
• OFF: Do not write
Stores the number of times PresentValue was updated. (0 to 32767)
*1
*2