Analoginput (Ai) Object - Mitsubishi Electric MELSEC iQ-F Series User Manual

AnalogInput (AI) object

This object handles analog input.
Property list
The following table lists available properties for the AnalogInput object.
Additionally, the availability of reading/writing data from/to a BACnet device is shown in the following table.
R: Read-only, W: Read/Write
PropertyID Property
36 EventState
75 ObjectIdentifier
77 ObjectName
79 ObjectType
81 OutOfService
85 PresentValue
103 Reliability
111 StatusFlags
117 Units
371 PropertyList
*1 Only ANSI/ASHRAE Standard 135-2016 and ANSI/ASHRAE Standard 135-2012 are supported.
Buffer memory format of the AnalogInput object
For the format of the properties assigned to the buffer memory, refer to the following.
Page 85 BACnet communication AnalogInput
Ethernet module operation
■Operation at startup
For the startup operation, refer to the following.
Page 22 Ethernet module operation
Setting using a program
For the setting using the program, refer to the following.
Page 26 Setting using a program
4 FUNCTIONS
34
4.2 BACnet Object Function
*1
Data type
Enumerated
BACnetObjectIdentifier
CharacterString
Enumerated
BOOLEAN
REAL
Enumerated
BitString
Enumerated
BACnetARRAY[N]ofBACnetPropertyIdenti
fier
R/W Description
R Indicates the event status.
R Indicates the ID to identify the object.
R Indicates the object name.
R Indicates the object type.
W Indicates whether the device is
disconnected from the physical input.
W Indicates the current value of the input
being measured.
R Indicates reliability.
R Indicates the object status.
R Indicates the unit.
R Indicates the property list.