Mitsubishi Electric MELSEC iQ-F Series User Manual page 87

BACnet communication AnalogInput
■BACnet communication AnalogInput (Un\G8600 to Un\G8746)
This buffer memory area is used for the AnalogInput object.
Address
Un\G8600 to Un\G8606
Un\G8620 to Un\G8626
Un\G8640 to Un\G8646
Un\G8660 to Un\G8666
Un\G8680 to Un\G8686
Un\G8700 to Un\G8706
Un\G8720 to Un\G8726
Un\G8740 to Un\G8746
When the value of `Module READY` (Un\G34, b0) was changed from 0 to 1, the AnalogInput object settings
are reflected. ( Page 56 AnalogInput object setting)
The following table lists the buffer memory area format (BACnet communication AnalogInput 1) of the AnalogInput object.
Address Name
Un\G8600, Object ID
Un\G8601
Un\G8602, PresentValue
Un\G8603
Un\G8604 OutOfService
Un\G8605 Reliability
Un\G8606 Units
*1 Stores the setting value of AnalogInput object setting No.1.
Description
BACnet communication AnalogInput 1
BACnet communication AnalogInput 2
BACnet communication AnalogInput 3
BACnet communication AnalogInput 4
BACnet communication AnalogInput 5
BACnet communication AnalogInput 6
BACnet communication AnalogInput 7
BACnet communication AnalogInput 8
Description
b0 to b9: Object type Stores the object type. (Fixed at 0)
b10 to b31: Instance Stores the instance number. (0 to 4194303)
number
Stores the current analog value. (Within the 32-bit floating-point data type real
number)
b0: OutOfService Sets the value of the OutOfService property.
• ON: TRUE
• OFF: FALSE
b0 to b5: Reliability Stores the value of the Reliability property.
• 0: NoFaultDetected
• 1: NoSensor
• 2: OverRange
• 3: UnderRange
• 4: OpenLoop
• 5: ShortedLoop
• 6: NoOutput
• 7: UnreliableOther
• 8: ProcessError
• 9: MultiStateFault
• 10: ConfigurationError
Stores the unit.
• 0: square-meters
• 1: square-feet
• 2: milliamperes
• 3: amperes
• 4: ohms
• 5: volts
• 6: kilovolts
• 7: megavolts
• 8: volt-amperes
• 9: kilovolt-amperes
• 10 to 65535: Unit other than the above
*1
*1
Appendix 1 Buffer Memory
A
APPX
85