SATO CT4-LX Operator's Manual page 346

Hide thumbs Also See for CT4-LX:

Table of Contents

RFID Write with Tear-Off Mode (Tag Offset = 0)

When tear-off mode is selected, the tag backfeeds before printing and stops at the manual cut position

after printing.

*1 Because the EPC code read and RFID read [DC2]PJ commands acquire the information at this

inlay position, do not use them.

*2 The EPC code write <IP0> command writes the data at this inlay position. The EPC code read,

UID/EPC/IDm print <TU>, and UID/EPC/IDm return <RU> commands acquire the information at this

inlay position.