[Firm Version]; [Host Bd Address]; [Pairing]; [Iap Ready] - SATO CT4-LX Operator's Manual

[Firm Version]

Shows the firmware version of the Bluetooth. (You cannot change this value.)

[Host BD Address]

Check the Host BD address.

[Pairing]

Pair the product with a Bluetooth device.
The items are as follows:
Available devices
The product searches for a Bluetooth device and shows the name of the device.
Paired devices
Shows a list of previously paired device. Select a device to delete from the list.
• Only devices with an HFP, HSP, or HID Bluetooth profile appear in [Available devices].
For example, a headset, keyboard, or barcode scanner.

[IAP Ready]

Shows the operational status of the IAP authentication chip, enabling the communication between an
iOS-equipped device and a Bluetooth device.
When the communication is enabled,

[iOS Reconnect]

Disable the iOS reconnect function or set to the Manual mode.
The options are as follows:
Disabled
The product does not perform iOS reconnection. You need try reconnection from iOS device.
Manual
The product performs iOS reconnection when the product is powered on or it switches to online or
offline.

[Authentication]

Set the authentication level.
The options are as follows:
is displayed.
284
[Authentication]