Loading A Media Roll (When The Optional Cutter Unit Is Installed) - SATO CT4-LX Operator's Manual

Hide thumbs Also See for CT4-LX:

Table of Contents

Loading a Media Roll (When the Optional Cutter Unit Is Installed)

The print head and its surroundings are hot after printing. Be careful not to get burned.

Touching the edge of the print head with your bare hand could cause injury.

Be careful not to touch the cutter blade.

Adjust the cut position so as not to cut the label.

1. Press the cover open latch (1) to open the top cover (2).

2. While pulling the slide lever (3), move the right side media guide (4) to adjust the

width of the media guide to match the width of the media.