Table of Contents
Advertisement
Enable the command error indication. The command error is shown and the print operation is
paused when incorrect command or parameter is detected in the print data.
Disable the command error indication.
[Standard Code]
Set the protocol code.
Use a standard code.
Use a non-standard code.
•
A message prompting you to restart the product will appear on the Home screen if
you have made any changes. In such a case, reboot the product to apply the settings.
When [AUTO] is selected in the [Protocol] menu while this setting is disabled, this
setting will become enabled.
[Orientation]
Select the layout for printing the label.
Portrait
Use a portrait layout. (No rotation)
Landscape
Use a landscape layout. (90-degree rotation)
Inv. Portrait
Use an inverse portrait layout. (180-degree rotation)
Inv. Landscape
Use an inverse landscape layout. (270-degree rotation)
[Font Settings]
Set the font.
The setting items are as follows:
[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
This setting is applied to the following bitmap fonts:
U, S, M, WB, WL, XU, XS, XM, XL, X20, X21, X22, X23, X24
220
[SBPL]
Advertisement
Table of Contents
