SATO CT4-LX Operator's Manual page 33

Internal View
(1) Print head (Consumables)
Creates an image on the media. Clean the print head regularly.
(2) USB connector (Type A)
You can use USB memory to automatically back up setting information by using the auto-clone
function.
The connector is on the underside of the top cover. Pull out the parts (3), on which
engraved, inside the top cover, remove the cover that is held by screws, and then insert the USB
memory.
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
33
are