Table of Contents
Advertisement
MQTT over WebSocket
Set this to use port number 443 only to do MQTT communication. A proxy server cannot be used.
[Add Device] (SOS users only)
Shows the serial number and association code that are necessary when adding the product to SOS
(SATO Online Services).
Available only if you have selected something other than [Disabled] in the [SOS Mode] menu.
•
Regarding the procedure to add a product to SOS, refer to the printer setup manual.
https://www.sato-sos.com/en/support/#print_preparation_manual
[Contact Information] (SOS users only)
Shows the SOS (SATO Online Services) contact information that is displayed at the time of the error
outbreak.
Available only if you have selected something other than [Disabled] in the [SOS Mode] menu.
The item is as follows:
Phone Number
Shows the phone number that is displayed on the error screen.
[Periodic Notification] (SOS users only)
Sets the function for periodic SOS (SATO Online Services) notifications.
Available only if you have selected [On-Demand] in the [SOS Mode] menu.
In this function, the product information is shown periodically with a QR code. Scan the displayed QR
code with a tablet or smartphone, and send the information to the SOS cloud.
A specialized application is required to scan the QR code.
The setting items are as follows:
[Type] (SOS users only)
Select the timing to perform the periodic notification or disable this function.
Advanced setting items appear on the [Periodic Notification] menu according to the selected options.
The options are as follows:
Disabled
Disables the periodic notification function.
Daily
Displays the notification screen every day for specified number of times, at the specified time.
Appears only if you have enabled the NTP function or installed the optional RTC kit.
Weekly
Displays the notification screen every week at the specified day of week and time.
Appears only if you have enabled the NTP function or installed the optional RTC kit.
200
[Network]
Advertisement
Table of Contents
