Table of Contents
Advertisement
9. Tap [Start] and execute automatic sensor adjustment according to the on-screen
instructions.
Remove the label from the liner and set the liner so the I-mark is not above the I-mark sensor.
For media without liners, such as wristbands or journal paper, load the media as is.
When the sensor adjustment is complete, the [Sensor adjustment] value changes to [Complete].
•
This is displayed only if you have selected [Gap] or [I-Mark] for the sensor type.
•
The results of executing automatic sensor calibration are reflected in the setting items
under [Printing] > [Advanced] > [Calibrate].
•
If you do not execute automatic sensor calibration, the product's currently set values
are registered.
10. Tap
or slide the screen to the left.
Registering Print Settings as Media Profiles (When Using Multiple Types of Media)
146
Advertisement
Table of Contents
