Table of Contents
Advertisement
•
This is displayed only if you have selected [Gap] or [I-Mark] for the sensor type.
•
The results of executing automatic sensor calibration are reflected in the setting items
under [Printing] > [Advanced] > [Calibrate].
9. Tap
or slide the screen to the left.
10. Select whether to enable or disable the Label Waste Prevention function, and then
tap
or slide the screen to the left.
•
This is not displayed if the optional dispenser unit or linerless cutter unit is installed.
•
When using linerless labels, journal paper, or RFID tags, you cannot use the Label
Waste Prevention function.
11. Tap [Edit].
139
Advertisement
Table of Contents
