Table of Contents
Advertisement
[Tilde]
Set the tilde (~) code.
The setting range is from 0 to 255.
•
You need to set different values for each code (caret, delimiter, tilde).
[Clock Format]
Set the date format.
The options are as follows:
•
[(none)]
•
[MM/DD/YY (24-hour clock)] (Example: 01/24/17 (13:45))
•
[MM/DD/YY (12-hour clock)] (Example: 01/24/17 (01:45))
•
[DD/MM/YY (24-hour clock)] (Example: 24/01/17 (13:45))
•
[DD/MM/YY (12-hour clock)] (Example: 24/01/17 (01:45))
[Default Font]
If you are using the multilingual fonts in the product, select a default font from the list.
[SIPL]
To use SIPL as a printer command, set the following items:
[Font Settings]
Set the font.
The setting items are as follows:
[Code Page]
Select the code page to be used from the list.
[New Font Encoding]
Enable or disable new font encoding.
•
Contact your SATO sales representative for more information about the new font.
[Proportional]
Set whether to print each character using a proportional pitch or fixed pitch.
Print each character with a proportional pitch.
224
[SIPL]
Advertisement
Table of Contents
