Print Method (Combined Direct Thermal/Thermal Transfer Model Only) - SATO CT4-LX Operator's Manual

Print Method (Combined Direct Thermal/Thermal Transfer Model Only)

For the combined direct thermal/thermal transfer model, you can select from two types of print
methods.
Thermal transfer
Prints using a ribbon.
Direct thermal
Prints using direct thermal media.
• Ribbon is not necessary if you are using direct thermal media.
The print method can be set through the Startup Guide, Media Startup, and Media Profiles
Registration. Alternatively, the following procedure can be used.
1. Tap [SETTINGS] on the Home screen or Offline screen.
2. Input the password if it is enabled.
3. Tap [Printing].
151