SATO CT4-LX Operator's Manual page 267

◦ buff/
The buffer data saved after you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2. Tap the file to copy. The selected file name is highlighted.
3. Tap
to copy the selected file to the USB memory.
• When [Hex Dump Mode] is enabled, it may take some time before the files appear.
[Remove]
Delete the log files of the product.
The procedure to delete the log files is as follows:
1. Tap the file type from the list to delete.
◦ buff/
The buffer data saved after you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2. Tap the file to delete. The selected file name is highlighted.
3. Tap
to delete the selected file.
• When [Hex Dump Mode] is enabled, it may take some time before the files appear.
[Print]
Print a hex dump of the log files of the product.
The procedure to print the log files is as follows:
1. Tap the file type from the list to print.
◦ buff/
The buffer data saved after you perform the [Buffer Dump].
◦ hexdump/
The received data created through [Hex Dump Mode].
2. Tap the file to print. The Offline screen appears.
3. Tap [ONLINE] to start printing.
267