Adjusting The Buzzer Volume - SATO CT4-LX Operator's Manual

Adjusting the Buzzer Volume

The adjustment procedure for the buzzer volume when an error occurs is as follows:
1. Tap [SETTINGS] on the Home screen or Offline screen.
2. Input the password if it is enabled.
3. Tap [System].
You can switch the screen by tapping
4. Tap [Sound] > [Volume].
5. Change the setting value.
The setting range is from 0 to 8.
0 is the lowest and 8 is the highest.
If you set the volume to 0, it mutes the sound.
6. Tap
to save the setting value.
/ or sliding the screen to the left or right.
384
Adjusting the Buzzer Volume