Table of Contents
Advertisement
•
The selectable print modes differ according to the installed options.
Installed option
None
Dispenser unit
Cutter unit
Linerless cutter unit
[Backfeed]
[Backfeed] is applicable only when the print mode is set to something other than continuous mode.
The options are as follows:
None
Does not backfeed.
After
After cut, backfeed the leading edge of the next media to the print head position.
For dispenser mode, backfeed the media to the leading edge of the next label after dispensing the
label.
Before
Before printing, backfeed the leading edge of the next media to the print head position.
Print mode
Continuous/Tear-Off
Continuous/Dispenser
Continuous/Tear-Off/Cutter/Cut & Print/
Partial cutter
Linerless cutter/Linerless tearoff
168
[Backfeed]
Advertisement
Table of Contents
