Table of Contents
Advertisement
3. Insert the fan-fold media from the media loading port.
(A) Media height (from desk): within 100 mm (3.94")
(B) Distance between the back side of the product and the media: The size of 1 label, or more/the
size of 2 RFID tags, or more
•
When loading the media, make sure that the label side faces up.
•
The height may be limited depending on where media is placed.
•
When drawing the media from under the desk, not from the position on the same desk
which the rear side of the product is placed, place the media so as not to obstruct the
printing operation.
4. Pull out the fan-fold media inserted from the back of the product.
122
Loading the Fan-fold Media
Advertisement
Table of Contents
