SATO CT4-LX Operator's Manual page 354

Hide thumbs Also See for CT4-LX:

Table of Contents

RFID Write with Dispenser Mode and Backfeed After Printing (Tag Offset = 0)

When dispenser mode with backfeed after printing is selected, the tag backfeeds after the tag is

removed and stops at the print head position.

*1 The EPC code write <IP0> command writes the data at this inlay position. The EPC code read,

RFID read [DC2]PJ, UID/EPC/IDm print <TU>, and UID/EPC/IDm return <RU> commands acquire the

information at this inlay position.