Table of Contents
Advertisement
Cleaning Intervals
Clean the product at the following regular intervals.
•
The below cleaning intervals are only for reference. Clean the product when necessary
even if you are not at a regular interval.
•
After every media roll or after printing 50 m (164.0 feet) of print media
Use a cotton swab or cotton cloth dampened with cleaning liquid to clean the following parts:
◦
Print head
◦
Platen roller
Use the cleaning kit to clean following parts:
◦
Media sensors
◦
Media guide
◦
Media route
•
After every 6 media rolls or after printing 300 m (984.3 feet) of print media
Use the cleaning sheet to clean the following parts:
◦
Print head
Cleaning guidelines for when the optional linerless cutter kit is installed are as follows:
•
After you print one media roll or whenever there is any glue residue or paper dust on the media
route
Use a cotton swab or cotton cloth dampened with cleaning liquid, and the cleaning kit to clean the
following parts:
◦
Linerless platen roller
◦
Print head
◦
Media guide
◦
Media sensors
◦
Media route
434
Cleaning Intervals
Advertisement
Table of Contents
