F4: Adm - ATEN CL5816 User Manual

CL5808/CL5816 User Manual

F4: ADM

F4 is an administrator only function. It allows the administrator to configure
and control the overall operation of the OSD. To change a setting double-click
it, or use the up and down arrow keys to move the highlight bar to it then press
[Enter].
After you select an item, a submenu with further choices to select from appears.
Double-click an item, or move the highlight bar to it then press [Enter]. An
icon appears before the selected item so that you know which one it is. The
settings are explained in the following table:
Setting
SET USER
LOGIN
38
Use this function to set login mode, usernames, passwords and
fingerprints for the administrator and users.
SET USERNAME AND PASSWORD
Usernames and passwords for one administrator and four users
can be set.
After you select the administrator field or one of the user fields, a
screen that allows you to key in the username and password
appears. Usernames and passwords can be from 1 to 16
characters long and can consist of any combination of letters
and numbers (A–Z, 0–9) and some additional keys (* ( ) + : - , ? .
/ space).
For each individual, key in the username and password, confirm
the password, then press [Enter].
To modify or delete a previous username and/or password, use
the backspace key to erase individual letters or numbers. Press
[Enter] when done.
Usernames and passwords are not case sensitive. Usernames
are displayed in capital letters in the OSD.
SET FINGERPRINT:
Note: This setting is only available on models with a fingerprint
reader.
Selecting this option enables the fingerprint reader to record
fingerprints.
Fingerprints can be used in conjunction with, or in place of, a
username and password when logging in. Although up to 10
fingerprints can be scanned for each user account, a maximum of
20 fingerprints can be stored on the switch, depending on the size
of the fingerprint data file.
Function