CS1762 / CS1764 User Manual
Powering Off and Restarting
If it becomes necessary to Power Off the CS1762 / CS1764 unit, before starting
it back up you must do the following:
1. Shut down all the computers that are attached to the switch.
2. Unplug the switch's power adapter cable.
3. Wait 10 seconds, then plug the switch's power adapter cable back in.
4. After the switch is up, Power On the computers.
Port ID Numbering
Each CPU port section on the CS1762 / CS1764 switch is assigned a port
number (1 or 2 for the CS1762; 1 to 4 for the CS1764). The port numbers are
marked on the rear panel of the switch (see page 5 for details).
The Port ID of a computer is derived from the CPU port number it is connected
to. For example, a computer connected to CPU port 2 has a Port ID of 2.
The Port ID is used to specify which computer gets the KVM, USB peripheral,
and audio focus with the Hotkey port selection method (see page 12 for
details).
10