Transportation & Installation - Toshiba TOSVERT VF-nC3E Instruction Manual

 Transportation & installation
I
 Do not install or operate the inverter if it is damaged or any component is missing.
 Do not place any inflammable objects nearby.
Prohibited
 Do not install in any location where the inverter could come into contact with water or
 Must be used in the environmental conditions prescribed in the instruction manual.
 Mount the inverter on a metal plate.
 Do not use the inverter without the terminal block cover. This can result in electric shock.
 An emergency stop device must be installed that fits with system specifications (e.g. shut
Mandatory
action
 All options used must be those specified by Toshiba.
 When using switchgear for the inverter, it must be installed in a cabinet.
 When transporting or carrying, do not hold by the front panel covers.
 Do not install in any area where the unit would be subject to large amounts of vibration.
Prohibited
 When removing and installing the terminal cover with a screwdriver, be sure not to scratch
 Pressing too hard on the screwdriver may scratch the inverter.
 Always cut the power supply when removing the wiring cover.
 After wiring is complete, be sure to replace the terminal cover.
 The main unit must be installed on a base that can bear the unit's weight.
Mandatory
action
 If braking is necessary (to hold motor shaft), install a mechanical brake.
This can result in electric shock or fire. Call your Toshiba distributor for repairs.
If a flame is emitted due to malfunction, it may result in a fire.
other fluids.
This can result in electric shock or fire.
Use under any other conditions may result in malfunction.
The rear panel gets very hot. Do not install in an inflammable object, this can result in fire.
Failure to do so can lead to risk of electric shock and can result in death or serious injury.
off input power then engage mechanical brake). Operation cannot be stopped immediately
by the inverter alone, thus risking an accident or injury.
The use of any other option may result in an accident.
Failure to do so can lead to risk of electric shock and can result in death or serious injury.
The covers may come off and the unit will drop out resulting in injury.
That could result in the unit falling, resulting in injury.
your hand as this results in injury.
If the unit is installed on a base that cannot withstand that weight, the unit may fall
resulting in injury.
The brake on the inverter will not function as a mechanical hold, and if used for that
purpose, injury may result.
Warning
Warning
Caution
4
E6582233
Reference
section
1.4.4
1.4.4
1.4.4
Reference
section
1.4.4
1.4.4
1.4.4
1.4.4
1.4.4
9.
Reference
section
2.
1.4.4
1.3.2
1.3.2
1.3.2
1.3.2
1.4.4
1.4.4