Input Signal Selection; Priority Selection (Both F And R Are On) - Toshiba TOSVERT VF-nC3E Instruction Manual

If the detection band value + the set frequency is less than the designated frequency
6.2

Input signal selection

6.2.1
6
 : Priority selection (Both F and R are ON)
 Function
[Parameter setting]

Output frequency [Hz]
 + 
 - 
Set frequency attainment signal
: OUT-NO terminals
Inversion of set frequency
attainment signal

Priority selection (Both F and R are ON)

This parameter allows you to select the direction in which the motor runs when a forward run (F)
command and a reverse run (R) command are entered simultaneously.
1) Reverse
2) Slowdown stop
Title Function
Priority selection (Both F and R are
ON)

0
Adjustment range
0: Reverse
1: Slowdown stop
F-4
E6582233
Time [s]
ON
OFF
ON
OFF
Default setting
1