Input Signal Selection - Toshiba VFNC3-2001P Instruction Manual

efesotomasyon.com -Toshiba inverter,drive,servo,plc
If the detection band value + the set frequency is less than the designated frequency
6.2

Input signal selection

6.2.1
 : Priority selection (Both F and R are ON)
6
• Function
Parameter setting

Output frequency [Hz]
 + 
 - 
Set frquency speed reach signal
OUT-NO terminals
Set frequency speed reach signal:
Inverted
Priority selection (Both F and R are ON)
This parameter allows you to select the direction in which the motor runs when a forward run (F)
command and a reverse run (R) command are entered simultaneously.
1) Reverse
2) Slowdown stop
Title Function
Priority selection (Both F and R are
ON)

0
Adjustment range
0: Reverse
1: Slowdown stop
F-4
E6581595
Time [s]
ON
OFF
ON
OFF
Default setting
1