RECOIL STARTER
4. RECOIL STARTER INSPECTION
1. Remove the recoil starter
2. Check the operation of the ratchets by pulling the starter rope
out several times.
3. Check the tabs on the flywheel for damage.
5. RECOIL STARTER ROPE REPLACEMENT
1. Remove the recoil starter
2. Pull the starter rope until the starter rope is pulled out fully.
See
page 7-6
if the rope is broken.
7-4
(P.
7-2).
(P.
7-2).
HRN216
RATCHETS
TABS
STARTER
ROPE