Honda HRN216 Series Manual page 70

HRN216
2. Clean the driven disk clutch and brake surface with a
clean, dry shop towel. Replace the driven disk if it has
been contaminated with oil.
NOTICE
Do not put the driven disk into the parts cleaner. If the
driven disk is washed with parts cleaner, the driven disk
will require replacement.
3. Disassemble the brake assembly:
a. Push the spring hook plate down.
b. Rotate the spring hook plate clockwise.
c. Release the three hooks.
d. Separate the brake plate from the ball plate, and
remove the three balls.
4. Inspect the ball plate spring for damage or
deformation, such as bending or cracks.
BLADE HOLDER/ROTO-STOP®
BRAKE
ASSEMBLY
BALL PLATE SPRING
SPRING HOOK PLATE
a.
b.
c.
4-9