Honda HRN216 Series Manual page 160

HRN216
5. Unlock both handle locking knobs and fold the
handlebar over the mower into the storage position.
6. Remove both handle locking knobs
7. Have an assistant hold and support the handlebar and
then remove the two special bolts and the handlebar
from the handle stays.
8. Install the handlebar in the reverse order of its removal.
• Install new cable ties and position them properly
(P. 11-10).
(P. 2-21).
HANDLEBAR/ CABLES/CONTROLS
HANDLE
LOCKING
KNOBS
SPECIAL
BOLTS
11-3