Honda HRN216 Series Manual page 67

BLADE HOLDER/ROTO-STOP®
2. ROTO-STOP
VYA TYPE
PARTS REFERENCE
STEEL BALL (3)
BRAKE PLATE BRAKE PLATE
BALL PLATE SPRING
SPRING HOOK PLATE
SPECIAL BLADE
HOLDER BOLT
4-6
®
/DRIVE PULLEY
BEARING
Replace if it
doesn't rotate
smoothly.
BALL PLATE
SPRING
INSPECT: P. 4-10
BEARING
Replace if it
doesn't rotate
smoothly.
DRIVE PULLEY
"M" code marking identifies this
drive pulley is for an
HRN216VYA model. Visually
verify this code is correct
before installing.
BLADE
HOLDER
CLUTCH SPRING
"UP" mark towards engine
:
INSPECT P. 4-10
HRN216
WOODRUFF KEY
Install in lower
keyway slot.
DRIVE DISK
"7" mark on the
back identifies
the disk fits the
HRN216VYA
model.
DRIVEN DISK
5-digit code mark starting
with an "R" identifies the
disk will fit an HRN216VYA
model.
NOTE:
This is an ink marking and
may be difficult to see, and
may wear off over time.