Honda HRN216 Series Manual page 39

SERVICE INFORMATION
11. MAIN HARNESS ROUTING (VLA TYPE)
BATTERY BOX
CLIPS
Clip harness securely to the
handle pipe.
STARTER HARNESS
YELLOW WIRE
(from key switch)
BATTERY WIRE FROM
STARTER SWITCH
(RED WIRE)
STARTER
HARNESS
BULLET CONNECTOR
(yellow wire to black wire)
WHITE WIRE TO
STARTER MOTOR
POSITIVE TERMINAL
ENGINE STOP SWITCH
WIRE CONNECTOR
(YELLOW WIRE)
2-30
BATTERY CHARGER CONNECTOR
Disconnect the connector, and plug the
battery charger into the side of the
connector closest to the battery box.
CHARGE COIL
(built into
ignition coil)
STARTER
MAGNETIC
SWITCH
STARTER MOTOR
POSITIVE TERMINAL
(WHITE WIRE)
HARNESS GUIDE
Route the starter harness
through the metal harness
guide.
IGNITION COIL
CHARGE COIL WIRE
(WHITE WIRE)
START SWITCH AND BATTERY
GROUND (BLACK WIRE)
STARTER MOTOR
NEGATIVE TERMINAL
(BLACK WIRE)
HRN216
STOP SWITCH NEGATIVE
GROUND WIRE (BLACK)
(also see page 9-11)
SPARK PLUG WIRE