Honda HRN216 Series Manual page 17

SERVICE INFORMATION
Electric Starter Will Not Operate
VLA type only
Check the battery voltage.
12.7 V or more
Check the 30 A fuse (P. 11-28).
OK
Turn the key to the START position and
check the voltage from the red wire at
the starter magnetic switch to engine
ground (P. 9-13).
OK
Hold the flywheel brake lever against the
handlebar and turn the key to the START
position. Check the voltage from the
white wire at the starter magnetic switch
to engine ground. (P. 9-13).
12.7 V or more
Inspect/replace the starter motor
(P. 9-12).
2-8
Less than 12.7 V
NG
No voltage
No voltage
Replace the starter magnetic switch
(P. 9-14).
Charge the battery for 24 hours with
PN 06320-VH7-UA2 charger and
replace if necessary
"Battery Has Low Voltage (less than
12.7 V)" on page
• Replace the fuse
• Check the wire harness.
• Check the starter key switch and
replace if necessary
Magnetic switch is not functioning.
Check for voltage at the yellow wire on
the solenoid and then check the
ground side of the solenoid
NG
Check the flywheel brake cable
(P. 11-17).
HRN216
(P. 11-27). Go to
2-10.
(P. 11-27).
(P. 11-28)
(P. 9-13).
OK