Honda HRN216 Series Manual page 202

HRN216
5. REAR SHIELD
REMOVAL
1. Move the rear wheel height adjuster to the lowest deck
height (position #1).
2. Tip the mower on the right-hand side so that the air
cleaner is facing up.
3. Remove the Phillips-head screw and plain washer from
the rear housing.
4. Use a pick tool to pull the rear shield shaft out of the
slot in the rear housing.
5. Pull the shaft completely out of the rear housing and
rear shield.
VARIABLE MOWING SYSTEM/ MOWER DECK/WHEELS
SERVICE BULLETIN #110
REAR HEIGHT
ADJUSTER
SCREW/
WASHER
PICK
TOOL
REAR SHIELD
SHAFT
12-17