Honda HRN216 Series Manual page 103

FUEL SYSTEM
2. CONTROL BASE/GOVERNOR ARM
PKA/VKA/VLA TYPES
REMOVAL/INSTALLATION
GOVERNOR ARM/THROTTLE RETURN SPRING
INSTALLATION:
Install the governor rod through the throttle return spring as shown.
Connect each to the governor arm and carburetor throttle arm as shown.
THROTTLE ARM
FUEL VALVE
FUEL TUBE
(4.5 x 110 mm)
B8 TUBE CLIP
B12 TUBE CLIP
FUEL TUBE
5 x 12 mm SCREW
2.5 N•m (1.8 ft-lb)
FUEL VALVE BRACKET
8-12
GOVERNOR ROD
PAINT
THROTTLE RETURN SPRING
6 x 14 mm BOLT (CT bolt) (2)
12 N•m (9 ft-lb)
GOVERNOR
ARM
GOVERNOR ARM
ADJUSTMENT:
GOVERNOR ARM NUT
12 N•m (9 ft-lb)
GOVERNOR ARM BOLT
GOVERNOR SPRING
INSTALLATION:
Install with the short end side
toward the governor arm.
HRN216
P. 3-21